PD0922J5050D2 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Power Divider 50Ω to 50Ω

-
Model PD0922J5050D2
Rev D
Ultra Low Profile 0805 Power Divider
50Ω to 50Ω
Description
The PD0922J5050D2 is a low profile, sub-miniature Wilkinson power divider in an
easy to use surface mount package and is ideal for high volume manufacturing
while delivering higher performances than traditional printed and lumped element
solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS,
WCDMA and GPS, 802.11aa+g, Bluetooth, and Zigbee USA.
The PD0922J5050D2 is matched to 50 Ω and has a height profile of 0.8 mm. A two
section Wilkinson design results in increased isolation performance. Two external
resistors are required for operation. Components are available on tape and reel for
high volume manufacturing pick and place.
All Xinger components are constructed from ceramic filled PTFE composites which
possess excellent electrical and mechanical stability having X and Y thermal
coefficient of expansion (CTE) of 17 ppm/^oC.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 950 – 2150 MHz
• 12dB Isolation (output ports)
• Good Return Loss
• 0.8mm Height Profile
• 50Ω Outputs/Inputs
Parameter
Frequency
Input Port Impedance
Output Port Impedance
Return Loss
Min.
950
9.3
Typ.
50
50
11
Max
2150
Unit
MHz
Ω
Ω
dB
• External resistors required
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Insertion Loss*
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
0.7
0.1
1
10.5
12
0.8
dB
0.5
dB
3
Degrees
dB
2
Watts
Operating Temperature
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
+85
ºC
Top View (Near-side)
Side View
Bottom View (Far-side)
.079±.004
[2.00±0.10]
.021±.002
[0.53±0.05]
.049±.004
[1.25±0.10]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Pin Designation
1 Output 1
2 Input
3 Mid 2
4 Mid 1
5 GND
6 Output 2
.039
[0.98]
12
Orientation
Marker Denotes
Pin Location
65
6X .012
[0.30]
4X .026
[0.65]
3
6X .009
[0.22]
4
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]