AK4201_11 Datasheet, PDF (1/14 Pages) Asahi Kasei Microsystems – Stereo Cap-less HP-Amp

[AK4201]
AK4201
Stereo Cap-less HP-Amp
GENERAL DESCRIPTION
The AK4201 is an audio stereo cap-less headphone amplifier. The AK4201 eliminates the need for large
DC-blocking capacitors with a built-in Charge-pump circuit. A 100dB PSRR (Power Supply Rejection
Ratio) is achieved by a built-in regulator, and 2Vrms outputs are available with excellent linearity when the
AK4201 is used as a lineout amplifier. The AK4201 is available in tiny 12-pin USON (2.2 X 2.9mm), saving
board space, cost, and reducing component height.
FEATURE
† Stereo Cap-less Amplifier (No DC-blocking capacitors required)
† High PSRR (100dB at 217Hz)
† Output Power:
65 mW x 2ch @ 16Ω, AVDD=PVDD=5.0V, THD+N=-60dB
30 mW x 2ch @ 16Ω, AVDD=PVDD=3.3V, THD+N=-60dB
† Output Noise Level: 11µVrms (Ri=20kΩ, Rf=30kΩ)
† Line-Out level:
2.0Vrms @ 5kΩ, AVDD=PVDD=5.0V
2.0Vrms @ 5kΩ, AVDD=PVDD=3.3V
† Regulator built-in
† THD+N:
-60dB @ 16Ω, 50mW, AVDD=PVDD=5.0V
-60dB @ 16Ω, 20mW, AVDD=PVDD=3.3V
-100dB @ 5kΩ, 2Vrms, AVDD=PVDD=5.0V
-100dB @ 5kΩ, 2Vrms, AVDD=PVDD=3.3V
† Low Power Shutdown Mode
0.1µA (typ)
† Mute function at shutdown mode:
-88dB attenuation
No external component is required
† Zero offset by ground-referenced output
† Pop noise free at power-ON/OFF
† Power Supply: 2.6V ~ 3.6V or 4.5V ~ 5.5V
† Ta: −40 ∼ 85°C
† Package: 12pin USON (2.2 x 2.9mm, 0.5mm pitch)
MS1077-E-01
-1-
2011/02