SB05T80L Datasheet, PDF (1/3 Pages) Zibo Seno Electronic Engineering Co.,Ltd – 5.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Z ibo Seno Electronic Engineering Co., Ltd.
SB05T80L-SB05T200L
5.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features
! Schottky Barrier Chip
! Bypass Diodes for Solar Panels
! High Junction Temperture
! High Thermal Reliability
! Patented Super Barrier Rectifier Technology
! High Foward Surge Capability
! Ultra Low Power Loss, High Efficiency
! Excellent High Temperature Stability
Top View
Bottom View
Mechanical Data
! Case:TO-277B Molded Plastic "Green" Molding Compound
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
! Polarity: Cathode Band
! Mounting Position: Any
! Marking: Type Number
! Lead Free: For RoHS/Lead Free Version
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Parameter
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC blocking voltage
Symbol
V _RRM
V_RWM
V_DC
SB
05T60L
60
SB
05T80L
80
SB
SB
SB
SB
Unit
05T100L 05T120L 05T150L
05T200L
100
120
150
200
V
RMS Rectified Voltage
V_R(RMS)
42
56
70
84
105
140
V
Average Rectified Output Current (Note1)
IO
5.0
A
Non-Repetitive Peak Forward Surge8.3ms
Single Half Sine-Wave Superimposed on rated
IFSM
load(JEDEC Method) (Note2)
150
A
I ² t Rating for Fusing (t < 8.3ms)
I²t
93.4
A²s
Forward Voltage Drop
TA =25 ℃ @IF=1A
TA =25 ℃ @IF=3A
TA =25 ℃ @IF=5A
Typ Max. Typ Max. Typ Max.
Typ Max. Typ Max.
0.39 - 0.40 - 0.40 -
V FM
0.44 - 0.45 - 0.47 ^-
0.53 - 0.58 -
0.66 - 0.72 -
V
0.49 0.55 0.50 0.55 0.52 0.60 0.75 _{0.71 0.80 0.77 0.85}
Peak Reverse Curent
TA=25 ℃
IR
0.3
At Rated DC Blocking Voltage T_A=100 ℃
15
Typical Thermal Resistance
R _θJA
80
Junctionto Ambient
R θJL
15
Operating junction temperature range
TJ
-55 to +150
storage temperature range
TSTG
-55 to +150
Note:1.Valid Provided that are kept at ambient temperature at a distance of 9.5mm from the case.
2.Fr-4pcb.2oz.Copper,minimum recommend pad layout .18.8mm×14.4.Anode pad dimensions 5.6mm×14.4mm.
mA
℃ /W
℃
℃
SB05T80L-SB05T200L
1 of 3
www.senocn.com