SMCJ Datasheet, PDF (1/3 Pages) Bytes – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

SMCJ SERIES
GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 5.0 to 440 Volts
Peak Pulse Power-1500 Watts
SMC / DO-214AB
0.245(6.23)
0.220(5.59)
0.280(7.12)
0.260(6.60)
0.128(3.25)
0.108(2.75)
0.103(2.62)
0.079(2.02)
0.016(0.40)
0.006(0.152)
0.050(1.52)
0.030(0.77)
0.320(8.13)
0.304(7.73)
*Dimensions in inches and (millimeters)
FEATURES
* Glass passivated chip
* 1500 W peak pulse power capability with a 10/1000 µs wavefrom,
repetitive rate (duty cycle) : 0.01%
* Low leakage
* Excellent clamping capability
* Very fast response time
MECHANICAL DATA
Case : JEDEC DO-214AB molded plastic
Terminals : Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes positive end (cathode) except
for bidirectional types
Weight : 0.007 ounce, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
single phase, half wave, 60Hz resistive or inductive load.
for capacitive load, derate current by 20%
RATING
SYMBOL
VALUE
UNITS
Peak power dissipation with a 10/1000 µs waveform (note 1)
PPPM
Peak pulse current with a 10/1000 µs waveform (node 1)
IPPM
Power dissipation on infinite heatsink at TL = 75
PD
Peak forward surge current,8.3ms single half sine-wave unidirectional only (note 2)
IFSM
Operating junction and storage temperature range
TJ,TSTG
NOTES : (1) Non-repetitive current pulse per Fig. 5 and derated abobe TA = 25per Fig. 1
(2) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
1500
Watts
See next table
Amps
6.5
Watts
200
Amps
-55 to +150
2011/05
Zowie Technology Corporation