SMBJ Datasheet, PDF (1/3 Pages) Jinan Gude Electronic Device – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SMBJ SERIES
GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 5.0 to 440Volts
Peak Pulse Power-600 Watts
SMB/DO-214AA
0.150(3.80)
0.130(3.30)
0.096(2.43)
0.079(2.00)
0.187(4.75)
0.167(4.24)
0.055(1.40)
0.039(1.00)
0.236(6.00)
0.197(5.00)
0.087(2.20)
0.075(1.90)
0.016(0.40)
0.006(0.15)
*Dimensions in inches and (millimeters)
FEATURES
* Glass passivated chip
* 600 W peak pulse power capability with a 10/1000 µs wavefrom,
repetitive rate (duty cycle) : 0.01%
* Low leakage
* Excellent clamping capability
* Very fast response time
MECHANICAL DATA
Case : JEDEC DO-214AA molded plastic
Terminals : Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes positive end (cathode) except
for bidirectional types
Weight : 0.003 ounes , 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
single phase, half wave, 60Hz resistive or inductive load.
for capacitive load, derate current by 20%
RATING
SYMBOL
VALUE
UNITS
Peak power dissipation with a 10/1000 µs waveform (note 1)
PPPM
Peak pulse current with a 10/1000 µs waveform (node 1)
IPPM
Power dissipation on infinite heatsink at TL = 75
PD
Peak forward surge current,8.3ms single half sine-wave unidirectional only (note 2)
IFSM
Operating junction and storage temperature range
TJ,TSTG
NOTES : (1) Non-repetitive current pulse per Fig. 5 and derated abobe TA = 25per Fig. 1
(2) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
600
Watts
See next table
Amps
5.0
Watts
100
Amps
-55 to +150
2011/05
Zowie Technology Corporation