RGP10A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

RGP10A THRU RGP10M
SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
PATENTED ^DO-204AL
0.107(2.7)
0.080(2.0)
DIA.
0.034(0.86)
0.028(0.71)
DIA.
*Dimensions in inches and (millimeters)
TM
FEATURES
* GPRC (Glass Passivated Rectifier Chip) inside
* Glass passivated cavity-free junction
* Capable of meeting environmental standards of MIL-S-19500
* For use in high frequence rectifier circuits
* Fast switching for high efficiency
* 1.0 Ampere operation at TA=55^oC with no thermal runaway
* Typical IR less than 0.1uA
* High temperature soldering guaranteed: 260^oC/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
* Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
MECHANICAL DATA
Case : JEDEC DO-204AL molded plastic over glass body
Terminals : Plated axial leads , solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.012 ounes , 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
RGP10
SYMBOLS
AB
D
G
J JA K KA
Maximum repetitive peak reverse voltage
VRRM
50 100 200 400 600 600 800 800
Maximum RMS voltage
VRMS
35 70 140 280 420 420 560 560
Maximum DC blocking voltage
VDC
50 100 200 400 600 600 800 800
M
1000
700
1000
MA
1000
700
1000
UNITS
Volts
Volts
Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG.1)
I (AV)
1.0
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
Maximum instantaneous forward voltage at 1.0 A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
TA=125^oC
IR
TA=150^oC
Maximum reverse recovery time (NOTE 1)
trr
150
Typical junction capacitance (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
R JA
Operating junction and storage temperature range
TJ,TSTG
NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted.
30
Amps
1.3
Volts
5
30
uA
50
250 150 500 300 500 300 nS
15
55
-65 to +175
pF
o_{C / W}
o_C
REV. : 0
Zowie Technology Corporation