KBJ6005G Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED BRIDGE RECTIFIER

KBJ6005G THRU KBJ610G
SINTERED GLASS PASSIVATED BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 6.0 Amperes
KBJ
.134(3.40)
.122(3.10)
.992(25.20)
.976(24.80)
.158(4.00)
Nominal
.075(1.90)
.059(1.50)
.043(1.10)
.035(0.90)
.303(7.70) .303(7.70) .303(7.70)
.287(7.30) .287(7.30) .287(7.30)
.189(4.80)
.173(4.40)
.150(3.80)
.134(3.40)
.114(2.90)
.098(2.50)
.032(0.80)
.024(0.60)
*Dimensions in inches and (millimeters)
FEATURES
* Glass Passivated Die Construction
* High Case Dielectric Strength of 1500V_RMS
* Low Reverse Leakage Current
* Surge Overload Rating to 170A Peak
* Ideal for Printed Circuit Board Applications
* Plastic Material-UL Recognition Flammability
Classification 94V-0
* This Series is UL Listed Under Recognized
Component Index, File Number E95060
MECHANICAL DATA
Case : KBJ molded plastic
Terminals : Plated Leads, solderable per
MIL-STD-750, Method 2026
Polarity : Molded on body
Mounting : Through Hole for # 6 screw
Mounting torque : 5.0 in-lbs maximum
Weight : 4.6 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS
6005G 601G
602G
KBJ
604G
606G
608G
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
Maximum RMS voltage
VRMS
35
70
140
280
420
560
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
Maximum average forward rectified current @ TC=110^oC
I (AV)
6.0
610G
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Peak forward surge current 8.3ms single half sine-wave
IFSM
170
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage @ IF=3.0 A
VF
Maximum DC reverse current
at rated DC blocking voltage
@TC=25^oC
@TC=125^oC
IR
I²t rating for fusing ( t < 8.3ms ) ( NOTE 3)
Typical junction capacitance per element (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction and storage temperature range
I²t
CJ
R JC
TJ,TSTG
1.0
5.0
500
120
80
6.0
-65 to +150
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
(2) Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink.
(3) Non-repetifive, for t > 1ms and < 8.3ms.
Amps
Volts
uA
A²s
pF
K/W
o_C
REV. : 0
Zowie Technology Corporation