English
Language : 

GP10A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION RECTIFIER
PATENTED
GP10A THRU GP10Y
SINTERED GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1600 Volts
Forward Current - 1.0 Ampere
DO-204AL
0.107(2.70)
0.080(2.0)
DIA.
FEATURES
* GPRC (Glass Passivated Rectifier Chip) inside
* Glass passivated cavity-free junction
* Capable of meeting environmental standards of MIL-S-19500
* 1.0 Ampere operation at TA=75oC and 55oC with no thermal
runaway
* Typical IR less than 0.1uA
* High temperature soldering guaranteed: 260oC/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
* Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
0.034(0.86)
0.028(0.71)
DIA.
*Dimensions in inches and (millimeters)
TM
MECHANICAL DATA
Case : JEDEC DO-204AL molded plastic over glass body
Terminals : Plated axial leads , solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.012 ounes , 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature
unless otherwise specified.
GP10
SYMBOLS
UNITS
ABDG J KMNQ T VWY
Maximum repetitive peak reverse voltage
VRRM 50 100 200 400 600 800 1000 1100 1200 1300 1400 1500 1600 Volts
Maximum RMS voltage
VRMS 35 70 140 280 420 560 700 770 840 910 980 1050 1120 Volts
Maximum DC blocking voltage
VDC
50 100 200 400 600 800 1000 1100 1200 1300 1400 1500 1600 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG.1)
I (AV)
1.0
Amps
Peak forward surge current 8.3ms single half sine-wave
IFSM
30
superimposed on rated load (JEDEC Method)
25
Amps
Maximum instantaneous forward voltage at 1.0 A
VF
1.0
Maximum DC reverse current
TA=25oC
TA=125oC
IR
5
30
at rated DC blocking voltage
TA=150oC
50
1.25
Volts
5
50
uA
-
Typical junction capacitance (NOTE 1)
CJ
10
Typical thermal resistance (NOTE 2)
Operating junction and storage temperature range
R JA
TJ,TSTG
55
-65 to +175
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted.
-55 to +150
pF
oC / W
oC
REV. : 0
Zowie Technology Corporation