GBU6A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 100 Volts CURRENT - 6.0 Amperes)

GBU6A THRU GBU6M
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 6.0 Amperes
GBU
0.125(3.2)X45^o
CHAMFER
0.310(7.90)
0.290(7.40)
0.085(2.16)
0.065(1.65)
0.100(2.54)
0.085(2.16)
0.080(2.03)
0.065(1.65)
0.880(22.30)
0.860(21.80)
0.020 R(TYP.)
0.160(4.10)
0.140(3.50)
0.075(1.9)R.
0.080(2.03)
0.060(1.52)
0.190(4.83)
0.210(5.33)
0.140(3.56)
0.130(3.30)
9^o TYP.
5^o TYP.
0.040(1.02)
0.030(0.76)
0.022(0.56)
0.018(0.46)
*Dimensions in inches and (millimeters)
FEATURES
* Glass passivated chip junctions
* High case dielectric strength of 1500V_RMS
* High surge overload rating
* Ideal for printed circuit boards
* Plastic package has underwriters laboratory flammability
classification 94V-0
* This series is UL listed under recognized
component index, file number E54214
* High temperature soldering quaranteed:260^oC/10 seconds
0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension
MECHANICAL DATA
Case : Molded plastic body over passivated chip
Terminals : Plated Leads, solderable per
MIL-STD-750, Method 2026
Mounting Position : Any (NOTE 2)
Mounting torque : 5.0 in-lbs maximum
Weight : 0.15 ounce, 4.0 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS GBU6A GBU6B GBU6D GBU6G GBU6J GBU6K GBU6M UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000 Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000 Volts
Maximum average forward rectified
output current at TC=100^oC (NOTE 2,3)
I (AV)
6.0
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150^oC
IFSM
175
Maximum instantaneous forward voltage at 6.0 A
Maximum DC reverse current
@TC=25^oC
at rated DC blocking voltage
@TC=125^oC
Rating for fusing ( t < 8.3ms )
Typical junction capacitance per element (NOTE 1)
Typical thermal resistance (NOTE 2,3)
Operating junction and storage temperature range
VF
IR
I²t
CJ
R JA
R JC
TJ,TSTG
1.0
5.0
500
127
211
94
7.4
2.2
-55 to +150
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
(2) Units case mounted on 2.6 x 1.4 x 0.06" thick (6.5 x 3.5 x 0.15 cm) Al. Plate heatsink
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
Amps
Volts
uA
A²s
pF
o_{C / W}
o_C
REV. : 0
Zowie Technology Corporation