GBPC25 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 25A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER

GBPC25 AND 35 SERIES
GLASS PASSIVATED BRIDGE RECTIFIER
Reverse Voltage - 200 to 1000 Volts
Forward Current - 25~35 Amperes
GBPC-W
Wire leads
GBPC
Standard
GBPC-W
Wire leads
GBPC
Standard
METAL HEAT SINK
0.335(8.5)
0.295(7.5)
1.200
(30.5)MIN.
0.042(1.07)
0.038(0.97)
1.134(28.8)
1.114(28.3)
METAL HEAT SINK
0.94(2.4)
diam
0.254(6.45)
0.242(6.15)
1.133(28.8)
1.114(28.3)
0.661(16.8)
0.646(16.4)
0.335(8.5)
0.295(7.5)
0.925(23.5)
0.886(22.5)
0.035(0.9)
0.028(0.7)
Hole for
No. 8 screw
193(4.9) diam
1.134(28.8)
1.114(28.3)
0.732(18.6)
0.693(17.6)
0.720(18.3)
0.469(11.9) 0.705(17.9)
0.429(10.9)
0.661(16.8)
0.646(16.4)
1.134(28.8)
1.114(28.3)
FEATURES
* Glass passivated chip junctions
* Plastic Material has Underwriters Laboratory Flammability
Classification 94V-0
* Integrally mold heatsink provides very low thermal resistance
formaximum heat dissipation
* High forward surge current capability
* Universal 3-way terminals ; snap-on, wire wrap-around, or P.C.B.
mounting
* Typical IR less than 0.3uA
* High temperature soldering guaranteed :
260^oC/10 seconds at 5 lbs. (2.3kg) tension
0.732(18.6)
0.693(17.6)
0.571(14.5)
0.555(14.1)
*Dimensions in inches and (millimeters)
MECHANICAL DATA
Case : Molded Plastic with heatsink integrally mounted in the bridge
encapsulation
Polarity : As marked on Body
Mounting Torque : 20 in. -lb. max. Weight : 15 grams (approx)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
SYMBOLS
VRRM
VRMS
VDC
Maximum average forwardrectified current
(SEE FIG.1)
GBPC25
GBPC35
I (AV)
Peak forward surge current single half sine-wave _GBPC25
superimposed on rated load (JEDEC Method) GBPC35
IFSM
Rating (non-repetitive for greater than
1ms and less than 8.3ms) for fusing
GBPC25
GBPC35
I²t
02(W)
200
140
200
GBPC 25 AND 35
04(W)
06(W)
400
600
280
420
400
600
25
35
08(W)
800
560
800
340
400
375
660
10(W)
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Amps
A²s
Maximum instantaneous
forward voltage drop per leg at
Maximum DC reverse current
at rated DC blocking voltage
GBPC25 IF=12.5A
GBPC35 IF=17.5A
@TA=25^oC
@TA=125^oC
RMA isolation voltage from case to leads
VF
IR
VISO
Typical Junction Capacitance per leg (NOTE 1)
Typical thermal resistance per leg (NOTE 2)
GBPC25
GBPC35
Operating junctionStorage temperature range
CJ
R JC
TJ,TSTG
1.1
10
500
2500
300
1.9
1.4
-55 to +150
Volts
uA
Volts
pF
o_{C / W}
o_C
NOTES : (1) Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to case per leg
(3) Bolt down on heat-sink with sillicone thermal compound between bridge and mounting surface for maximun heat transfer efficiency with #10 screw
REV. 0
Zowie Technology Corporation