BYD187Z Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SURFACE MOUNT GLASS PASSIVATED JUNCTION ULTRAFAST EFFICIENT RECTIFIER

BYD187Z
SURFACE MOUNT GLASS PASSIVATED JUNCTION ULTRAFAST EFFICIENT RECTIFIER
Reverse Voltage - 800 Volts
Forward Current - 1.0 Ampere
PATENTED
1206
* Equivalent to SOD87, GL1M , SOD123
FEATURES
0.142 (3.60)
0.126 (3.20)
0.002 (0.05)
R0.016 ^(0.40)
0.035 (0.90)
0.020 (0.50)
0.035 (0.90)
0.020 (0.50)
* Lead free product
* Leadless chip form , no lead damage
* Lead-free solder Joint , No Wire bond & Lead Frame
* Low profile package
* For surface mounted applications
* Built-in strain relief
* Low power loss , High efficiency
* High current capability
* High surge capacity
* Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
*Dimensions in inches and (millimeters)
TM
TM
MECHANICAL DATA
Case : Packed with FRP substrate and epoxy underfilled
Terminals : Pure Tin plated (Lead-Free),
solderable per MIL-STD-750, Method 2026.
Polarity : Cathode Band, Laser marking
Weight : 0.012 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS
BYD187Z
Maximum repetitive peak reverse voltage
VRRM
800
Maximum RMS voltage
VRMS
560
Maximum DC blocking voltage
VDC
800
Maximum average forward rectified current TL=110^oC
I (AV)
1.0
Peak forward surge current 8.3ms single half sine-wave
IFSM
25
superimposed on rated load
UNITS
Volts
Volts
Volts
Amps
Amps
Maximum instantaneous forward voltage at 1.0 A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
TA=125^oC
IR
Maximum reverse recovery time (NOTE 1)
trr
2.50
5
50
35
Volts
uA
nS
Typical junction capacitance (NOTE 2)
CJ
10
pF
Operating junction and storage temperature range
TJ,TSTG
-65 to +175
o_C
NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Preliminary draft.
REV. 0
Zowie Technology Corporation