BYD17Z Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER

PATENTED
0.035 (0.90)
0.020 (0.50)
BYD17Z SERIES
SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 1000 Volts
Forward Current - 1.0 Ampere
1206
0.142 (3.60)
0.126 (3.20)
0.002 (0.05)
R0.016 ^(0.40)
0.035 (0.90)
0.020 (0.50)
* Equivalent to SOD87, GL1M , SOD123
FEATURES
* Lead free product
* Leadless chip form , no lead damage
* Lead-free solder joint , no wire bond & lead frame
* Low profile package
* For surface mounted applications
* Built-in strain relief
* Low power loss , High efficiency
* High current capability
* High surge capacity
* Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
*Dimensions in inches and (millimeters)
TM
TM
MECHANICAL DATA
Case : Packed with FRP substrate and epoxy underfilled
Terminals : Pure Tin plated (Lead-Free),
solderable per MIL-STD-750, Method 2026.
Polarity : Cathode Band, Laser marking
Weight : 0.012 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS BYD17ZD BYD17ZG BYD17ZJ BYD17ZK
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
Maximum RMS voltage
VRMS
140
280
420
560
Maximum DC blocking voltage
VDC
200
400
600
800
BYD17ZM UNITS
1000
700
1000
Volts
Volts
Volts
Maximum average forward rectified current (SEE FIG.1)
I (AV)
1.0
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
30
Amps
Maximum instantaneous forward voltage at 1.0 A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
TA=125^oC
IR
TA=150^oC
Maximum reverse recovery time (NOTE 1)
trr
1.0
1
30
50
3000
Volts
uA
nS
Typical junction capacitance (NOTE 2)
CJ
12
pF
Typical thermal resistance (NOTE 3)
R JA
R JL
80
40
Operating junction and storage temperature range
TJ,TSTG
-65 to +175
NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pad areas.
(4) Preliminary draft.
o_{C / W}
o_C
REV. 0
Zowie Technology Corporation