1N5391 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

1N5391 THRU 1N5399
SILICON RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5 Amperes
DO-204AC
0.140(3.6)
0.104(2.6)
DIA.
FEATURES
* High relliability
* Low reverse leakage
* Low forward voltage drop
* High current capability
MECHANICAL DATA
0.034(0.86)
0.028(0.71)
DIA.
*Dimensions in inches and (millimeters)
Case : JEDEC DO-204AC molded plastic
Epoxy : UL 94V-O rate flame retardant
Lead : MIL-STD-202F method 208C guaranteed
Mounting Position : Any
Weight : 0.38 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100 200
300 400 500 600 800 1000 Volts
Maximum RMS voltage
VRMS
35
70
140
210 280 350 420 560 700 Volts
Maximum DC blocking voltage
VDC
50
100 200
300 400 500 600 800 1000 Volts
Maximum average forward rectified current
at TL=70^oC
I(AV)
1.5
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.5 A
IFSM
VF
50
Amps
1.4
Volts
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TL=75^oC
IR(AV)
30
uA
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
IR
TA=100^oC
Typical junction capacitance ( NOTE )
CJ
5.0
uA
50
20
pF
Typical thermal resistance
R JA
50
o_{C / W}
Operating junction and storage temperature range
TJ,TSTG
-65 to +175
o_C
NOTES : Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
REV. : 0
Zowie Technology Corporation