1N4001E Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SILICON RECTIFIER

1N4001E THRU 1N4007E
SILICON RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
A-405
1.0(25.4)
MIN.
0.025(0.60)
DIA.
0.021(0.50)
FEATURES
* High relliability
* Low reverse leakage
* Low forward voltage drop
* High current capability
0.205(5.2)
0.166(4.2)
1.0(25.4)
MIN.
0.107(2.70)
0.080(2.00)
MECHANICAL DATA
*Dimensions in inches and (millimeters)
Case : JEDEC A-405 molded plastic
Epoxy : UL 94V-O rate flame retardant
Lead : MIL-STD-202F method 208C guaranteed
Mounting Position : Any
Weight : 0.20 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
SYMBOLS 1N4001E 1N4002E 1N4003E 1N4004E 1N4005E 1N4006E 1N4007E UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000 Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000 Volts
Maximum average forward rectified current
at TA=55^oC
I(AV)
1.0
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0 A
IFSM
VF
30
Amps
1.1
Volts
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TL=75^oC
IR(AV)
30
uA
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
IR
TA=100^oC
Typical junction capacitance ( NOTE )
CJ
5.0
uA
50
15
pF
Typical thermal resistance
R JA
50
o_{C / W}
Operating junction and storage temperature range
TJ,TSTG
-65 to +175
o_C
NOTES : Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
REV. : 0
Zowie Technology Corporation