Z02205 Datasheet, PDF (8/30 Pages) Zilog, Inc. – MODEM CONTROLLER IDEAL FOR LOW POWER CONSUMPTION, SMALL SIZE REQUIREMENTS

Z02205
Modem Controller
ZiLOG
V_CC
T_A = 0° C to +70°C
Sym
Parameter
Note [3]
Min
Typical [1]
Max
@ 25°C Units
Conditions
Notes
IIR
Reset Input
5.5V
–20
–180
–85
µA
Current
I_CC
Supply Current 5.5V
25
20
mA @ 16 MHz
4
I_CC1
Standby Current 5.5V
(HALT Mode)
8
3.7
mA V_IN = 0V, V_CC
4
@ 16 MHz
I_CC2
Standby Current 5.5V
(STOP Mode)
10
4
µA V_IN = 0V, V_CC WDT is 6,11
not Running
5.5V
800
600
µA V_IN = 0V, V_CC WDT is 6,11,
Running
13
V_ICR
Input Common
5.5V
0
V_CC–1.0V
V
10
Mode
Voltage Range
I_ALL
Auto Latch Low 5.5V
1.4
15
Current
5
µA 0V < V_IN < V_CC
9
I_ALH
Auto Latch High 5.5V
–1.0
–8
Current
–6
µA 0V < V_IN < V_CC
9
V_LV
V_CC Low
Voltage
Protection
Voltage
2.8
V 4 MHz max Int. CLK
7
Freq.
2.2
3.1
2.8
6 MHz max Int. CLK 7,13
Freq.
V_OH
Output High
Voltage
5.0V
V_CC–0.4
4.8
V I_OH = –0.5 mA
(Low EMI
Mode)
V_OL
Output Low
Voltage
5.0V
0.4
0.1
V I_OL = 1.0 mA
(Low EMI
Mode)
Notes:
1. Typicals at V_CC = 5.0V.
2. GND = 0V.
3. The V_DD voltage specification of 5.5V guarantees 5.0V ±0.5V with typicals at V_CC–5.0V.
4. All outputs unloaded, I/O pins floating, inputs at rail.
5. CL1 = CL2 = 10 pF.
6. Same as note [4] except inputs at V_CC.
7. The V_LV voltage increases as the temperature decreases and will overlap lower V_CC operating region.
8. Standard Mode (not Low EMI).
9. Auto Latch (Mask Option) selected.
10. For analog comparator, inputs when analog comparators are enabled.
11. Clock must be forced Low, when XTAL1 is clock-driven and XTAL2 is floating.
12. Excludes clock pins.
13. 0°C to 70°C (standard temperature).
6
PS001000-MOD0599