Z86L99ZEM Datasheet, PDF (6/8 Pages) Zilog, Inc. – Z8 In-Circuit Emulator

Z86L99 ZEM
Z8 In-Circuit Emulator
4
Emulator Kit Contents
The emulator kit contains one of each of the following items:
• Z86L99 Emulator board
• Z86D991 28-pin PDIP program adapter
• Z86D991 28-pin SOIC program adapter
• Z86D990 40-pin PDIP program adapter
• Z86D990 48-pin SSOP program adapter
• 28-pin PDIP emulation pod ZiLOG
• 40-pin PDIP emulation pod with cable
• Power Cable with banana plugs
• RS-232 Serial cable, 9-pin male and 25-pin female
• ZiLOG Developer Studio Installation CD
• Z86L99 Emulator UserÕs Manual
• ZiLOG Developer Studio Manual contained on the ZDS installation CD-ROM
Note: _{If the ZDS CD-ROM does not contain the manual it can be}
downloaded from the ZiLOG website at www.zilog.com.
Additional Items Required
The following item is required but is not currently supplied in the emulator kit:
• Power source (+5VDC typical) for the emulator. This can be a laboratory
power supply with a current rating of at least 1.5 amperes.
Optional Recommended Items
The following items are recommended:
• Target design, this is usually a wire-wrapped or printed circuit prototype that
includes a socket for the target device which the emulator cable/pod plugs
into.
• C-Compiler
Until ZDSÕs C-Compiler is completed, use Production Languages Corp.
(PLC) 3xx IDE tool to compile programs in C. Contact ZiLOG customer
support for more information on the ZDS C-Compiler.
• Oscilloscope
• Logic Analyzer
PS006201-IRR0500