Z86K13 Datasheet, PDF (6/24 Pages) Zilog, Inc. – CMOS Z8 8-Bit MCU Keyboard Controllers

Z86K13/K14/K15/K16/K17/K18
CMOS Z8® 8-Bit MCU Keyboard Controllers
ABSOLUTE MAXIMUM RATINGS
Symbol Description
Min Max
V_CC
Supply Voltage*
–0.3 +7.0
T_STG
Storage Temp
–65 +150
T_A
Oper Ambient Temp 0 +105
Note: * Voltage on all pins with respect to GND.
Units
V
°C
°C
Zilog
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to ab-
solute maximum rating conditions for extended periods
may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed here apply for standard test con-
ditions as noted. All voltages are referenced to GND. Pos-
itive current flows into the referenced pin (Figure 5).
From Output
Under Test
150 pF
Figure 5. Test Load Diagram
CAPACITANCE
T_A = 25°C; V_CC = GND = 0V; f = 1.0 MHz; unmeasured pins returned to GND.
Parameter
Input Capacitance
Output Capacitance
I/O Capacitance
Frequency tolerance ±10%
Max
12 pF
12 pF
12 pF
6
PRELIMINARY
DS97KEY0204