Z86E73 Datasheet, PDF (6/19 Pages) Zilog, Inc. – OTP IR Microcontrollers

PRELIMINARY
Z86E73/E74/L73/L74
CP95LVO0801
ABSOLUTE MAXIMUM RATINGS
Symbol Description
Min
V_CC
Supply Voltage (*) –0.3
T_STG
Storage Temp.
–65°
T_A
Oper. Ambient Temp.
Notes:
* Voltage on all pins with respect to GND.
† See Ordering Information.
Max Units
+7.0
V
+150° C
†
C
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational
sections of these specifications is not implied. Exposure to
absolute maximum rating conditions for an extended
period may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Test Load).
From Output
Under Test
I
150 pF
Test Load Diagram
CAPACITANCE
T_A = 25°C, V_CC = GND = 0V, f = 1.0 MHz, unmeasured pins returned to GND.
Parameter
Input capacitance
Output capacitance
I/O capacitance
Max
12 pF
12 pF
12 pF
6