Z86C96 Datasheet, PDF (5/11 Pages) Zilog, Inc. – CMOS Z8 MICROCONTROLLER

ABSOLUTE MAXIMUM RATINGS
Symbol Description
Min Max Units
V_CC
Supply Voltage*
–0.3 +7.0 V
T_STG
Storage Temp
–65 +150° C
T_A
Oper Ambient Temp
†
C
Notes:
* Voltages on all pins with respect to GND.
† See Ordering Information
Z86C96
CPS DC-4049-02
Stress greater than those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; operation of the device at any
condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to
absolute maximum rating conditions for an extended pe-
riod may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (see Test
Load Diagram).
From Output
Under Test
150 pF
+5V
2.1 kΩ
9.1 kΩ
Test Load Diagram
PLEASE NOTE
This device will not operate in extended Timing mode. Set Register 248 (F8H), D5 = 0.
5