Z86160 Datasheet, PDF (5/8 Pages) Zilog, Inc. – SET-TOP CONTROLLER

PRELIMINARY
ABSOLUTE MAXIMUM RATINGS
Z86160
CP96TEL1700
Symbol Description
Min Max Units
V
Supply Voltage*
–0.3 +7.0 V
CC
T
Storage Temp
STG
–65 +150 C
T_A
Oper Ambient Temp 0° 70° C
Notes:
* Voltages on all pins with respect to GND.
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational
sections of these specifications is not implied. Exposure to
absolute maximum rating conditions for an extended pe-
riod may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Test Load).
From Output
Under Test
I
15 pF
Figure 3. Test Load Diagram
5