Z86E47 Datasheet, PDF (4/8 Pages) Zilog, Inc. – CMOS Z8 8BIT MICROCONTROLLER

ABSOLUTE MAXIMUM RATINGS
PRELIMINARY
Z86E47-ROM
CPS DC-4157-01
Stress greater than those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; operation of the device at any
condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability.
Symbol
V_CC
V
I
V_I
V_O
I
OH
I_OH
I_OL
I_OL
I
OL
T_A
T_STG
Parameters
Power Supply Voltage †
Input Voltage
Input Voltage
Output Voltage
Output Current High
Output Current High
Output Current Low
Output Current Low
Output Current Low,all total
Operating Temperature
Storage Temperature
Notes:
[1] Port 2 open-drain
[2] PWM open-drain outputs
[3] Port 5
Min
Max
Units
–0.3
+7
V
–0.3
V + 0.3
V
CC
–0.3
V_CC + 0.3
V
–0.3
V_CC + 8.0
V
–10
mA
–100
mA
20
mA
40
mA
200
mA
††
–65
+150
C
† Voltage on all pins with respect to GND.
†† See Ordering Information
Notes
[1]
[2]
1 pin
all total
1 pin
[3] (1 pin)
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (see Test
Load Diagram).
From Output
Under Test
150 pF
VDD
RLL
RLH
Test Load Diagram
CAPACITANCE
T_A=25°C, V_CC=GND=0 V, Freq=1.0 MHz, unmeasured pins to GND.
Parameter
Input capacitance
Output capacitance
I/O capacitance
AFC_IN input capacitance
Max Units
10
pF
20
pF
25
pF
10
pF
4