Z86E03 Datasheet, PDF (4/9 Pages) Zilog, Inc. – CMOS Z8 OTP MICROCONTROLLERS

PRELIMINARY
GENERAL DESCRIPTION (Continued)
P24
P25
P26
P27
Vcc
XTAL2
XTAL1
P31
P32
1
18
2
17
3
16
4
15
Z86E03/E06
5
SOIC
14
6
13
7
12
8
11
9
10
P23
P22
P21
P20
GND
P36
P35
P34
P33
18-Pin SOIC
Pin Configuration
Z86E03/E06
CP95DZ81301
ABSOLUTE MAXIMUM RATINGS
Symbol Description
Min Max Units
V
Supply Voltage*
–0.3 +7.0
V
CC
V_IN
Input Voltage**
–0.3 V_CC + 0.3 V
T_STG
Storage Temp
–65 +150
C
T
Oper Ambient Temp †
C
A
Notes:
* Voltage on Vcc with respect to Vss.
† See Ordering Information
** Voltages on all pins with respect to Vss without current limitations.
Stress greater than those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; operation of the device at any
condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended period
may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to ground.
Positive current flows into the referenced pin (Test Load
Configuration).
150 pF
Test Load Configuration
4