Z86CCP01ZEM Datasheet, PDF (3/8 Pages) Zilog, Inc. – In-Circuit Program Debug Emulation

Zilog
HOST COMPUTER
Minimum Requirements
IBM PC (or 100-percent compatible) 386-Based Machine
33 MHz
4 MB RAM
VGA Video Adapter
Hard Disk Drive (3.0 MB free space)
3.5-inch, High-Density (HD) Floppy Disk Drive
RS-232C COM Port
Mouse or Pointing Device
Microsoft Windows 3.1
Z8® CCP™ In-Circuit Emulator
1 ^{The following changes to the Minimum Requirements are}
recommended for increased performance:
Pentium-Based Machine:
s 75 MHz (or faster)
s 16 MB of RAM (or more) SVGA Video Adapter
s Color Monitor
s Printer
s Microsoft Windows 95
s Hard Disk Drive (10.0MB free space)
ZMASM REQUIREMENTS
If using the optional Zilog Macro Cross Assembler, the following table lists the host computer requirements for it:
Table 1-1. Minimum and Recommended System Requirements
Windows 3.1
Windows 95
ZMASM
ZMASM
Minimum Recommended Minimum Recommended
Processor
386
486
486
Pentium
Speed (MHz)
33
66
66
100 (or higher)
RAM (MB)
4
8
8
16 (or more)
Video Adapter
VGA
SVGA
VGA
SVGA
Hard Disk (MB)
2.0
4.0
3.0
4.0
(Free Space)
3.5-Inch, HD Floppy Disk




Drive
RS-232C Com Port




Color Monitor


Mouse/Pt. Device




Printer


Editor


ZDS
Minimum Recommended
486
Pentium
66
150 (or higher)
8
32 (or more)
SVGA
SVGA
10.0
16.0






Included




Included
ADDITIONAL REQUIRED ITEMS NOT SUPPLIED
s Power source
s RS232 cable
s Host computer
s 28-pin ZIF Socket^*
s 28-pin DIP Target Cable^*
s 40-pin ZIF Socket^*
s 40-pin DIP Target Cable^*
s Your target design
Typically, this is a wire-wrapped or printed-circuit proto-
type that the Target Cable plugs into to emulate the target
device.
*_{depending upon target device.}
CP97Z8X5301
3