Z86217 Datasheet, PDF (3/7 Pages) Zilog, Inc. – CMOS Z8 8-BIT MICROCONTROLLERS (POINTING DEVICE/TRACKBALL)

PRELIMINARY
ABSOLUTE MAXIMUM RATINGS
Z86217/C17
CP95KEY1000
Sym Parameter
Min
V_DD Supply Voltage (*)
–0.3
T_STG Storage Temp
–65°
T_A
Oper Ambient Temp †
Notes:
* Voltages on all pins with respect to GND
† See Ordering Information
Max Units
+7
V
+150° C
†
C
Stress greater than those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; operation of the device at any
condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to GND.
Positive current flows into the referenced pin (Test Load).
From Output
Under Test
I
150 pF
CAPACITANCE
T_A = GND = 0V, f = 1.0 MHz, unmeasured pins to GND
Parameter
Input capacitance
Output capacitance
I/O capacitance
Max
10 pF
20 pF
25 pF
V_dd SPECIFICATION
V_dd = 3.0V to 5.5V
Test Load Diagram
3