ZAURA Datasheet, PDF (27/99 Pages) –

ZAURA RF Wireless Library
Programmer’s Reference Manual
15
Caution: Zilog does not recommend setting ZAURA_RF_IdleState to
ZAURA_RF_TRANSMIT. If the radio should remain in the
ZAURA_RF_TRANSMIT state, it will emit a continuous stream of extra
preambles until the radio is placed in another state. While the radio is
transmitting preambles, other ZAURA RF Wireless nodes within range
will sense a busy channel and will not be able to transmit.
ZAURA RF Wireless Module Configuration
Configuration of the ZAURA RF Wireless Library is determined by the
value of a set of global variables contained in the ZAURA_RF_Conf.c
file, which must be linked to every ZAURA RF project. Customers can
optionally modify the values assigned to these configuration variables to
modify the default behavior of the ZAURA RF Library.
Radio Configuration
ZAURA_RF_Params contains the ZAURA_RF_PARAMS structure and
settings shown in Table 4.
Table 4. ZAURA_RF_PARAMS Structure Settings
Structure
Member
Default
Network ID
Nid.Len (Length 0x02
of the ID)
Nid.Value.Data8[] 0x11,0x22,0x00,
0x00
Addr
0x1B
Range
1–4
4 bytes
0x01–0xFE
Meaning
Reference
Contains the network
identifier. All nodes that
will communicate
together must have the
same network ID.
See ZAURA
RF Wireless
Cell Network
Identifiers.
The address of this
node.
See Node
Addresses.
RM006003-1011
ZAURA RF Wireless Module Configuration