Z8700000ZEM Datasheet, PDF (2/3 Pages) Zilog, Inc. – Windows-Based User Interface

HOST COMPUTER
Minimum Requirements
IBM PC (or 100-percent compatible) 386-based
machine
33 MHz
4 MB RAM
VGA Video Adapter
Hard Disk Drive (1 MB free space)
3.5-inch, High-Density (HD) Floppy Disk Drive
RS-232C COM port
Mouse or Pointing Device
Microsoft Windows 3.1
Documentation
Emulator User's Manual
Registration Card
Product Information
Z8700000ZEM
CP95WRL1001
LIMITATIONS
1. Changing drives in file download and load symbol
dialog boxes is not anticipated by the GUI. Typing in
the filename in a directory other than shown in “Path:”
will result in “File not found”. Changing the drive using
the mouse is the workaround.
The following changes to the Minimum Requirements are
recommended for increased performance:
486- or Pentium-based machine
66 MHz (or faster)
8 MB of RAM (or more)
SVGA Video Adapter
Color Monitor
Printer
2. The GUI does not recognize the PUSH and POP
instructions when entered from In-Line Assembler.
Use "LD STACK, xxx" for PUSH and "LD xxx, STACK"
for POP instead.
3. The initial blue Zilog screen will be distorted by other
active windows. This only affects the appearance, not
functionality, of the GUI.
KIT CONTENTS
Z87000 Emulator
•Emulation Base Board includes:
CMOS Z86C9320PSC
8K x 8 EPROM (Programmed with Debug Monitor)
32K x 8 Static RAM
RS-232C Interface
Reset Switch
•Z87000 Emulation Daughterboard
16 MHz CMOS Z86C1216GSE ICE Chip
64K x 4 Static RAM
Two 32K x 4 Static RAM for Breakpoints
Two 80-Pin Target Connectors
100-Pin HP Logic Analyzer Interface Board Connector
4. Switching ICEBOXes without quitting the GUI is not
supported.
5. The maximum symbols that can be loaded is 32768,
provided that there is enough system resource
(memory).
6. Download File Name is not shown except at Time of
Download. The emulator only shows the name of the
file during the download process. To check the name
of the file currently downloaded, select "File" and then
"Download DSP Memory." The File Name box in the
"Down to DSP Code Memory" window will reflect the file
that is selected for download. Unlike other emulators,
the Debug window or Memory window does not show
the name of the currently downloaded file.
Cables/Pods
Power Cable with Banana Plugs
DB25 RS-232C Cable
84-Pin PLCC Emulation Pod Cable
Mini-Coax with SMA Connectors
Host Software
DSP GUI Emulator Software
Note: Cross-Assembler and C Compiler are sold
separately from Zilog or Production Languages,
Tel.: [phone]
2