ZHX1000 Datasheet, PDF (14/18 Pages) Zilog, Inc. – SIR Transceiver

ZHX1000
SIR Transceiver
10
Cleaning
Perform cleaning after soldering under the following conditions:
• Cleaning agent: Alcohol
• Temperature and time: 30 seconds below 50 °C or 3 minutes below 30 °C
• Ultrasonic cleaning: Below 20 W
ZHX1000 Packing, Storage, and Baking Recommendations
Follow these recommendations to maintain the performance of the ZHX1000 SIR
transceiver.
Storage
To avoid moisture absorption, ZHX1000 reels must remain in the original,
unopened moisture-proof packing. Parts must be soldered within 48 hours after
unpacking. Reels that have been unpacked, but will not be soldered within 48
hours, must be stored in a desiccator.
Baking
Parts that have been stored over 12 months or unpacked over 48 hours must be
baked under the following guidelines.
Reels
60 °C for 48 hours or more
Loose Parts
• 100 °C for 4 hours or more
or
• 125 °C for 2 hours or more
or
• 150 °C for 1 hour or more
PS015004-0702
Do not use in new designs