Z86L9900100ZC0 Datasheet, PDF (13/38 Pages) Zilog, Inc. – Evaluation Board IR Controllers

Z86L9900100ZCO
Z86L99 Evaluation Board
7
Table 1 Jumper Settings (Continued)
J15
Close
J17
Close
J18
Open
J19
Open
J20
Open
J21
Open
J22
Open
J23
Open
P60..P67,P40,P45,P46,P47 are connected to
column 0.. column11
Close if LED D8 indicate the power ON signal
Close if R16 provides an analog reference to P53
Close if R16 provides an analog reference to P53
Close if R16 provides an analog reference to P53
Close if R17 provides an analog reference to P50
Close if R17 provides an analog reference to P50
Close if R17 provides an analog reference to P50
4 Z86L9900100ZCO Schematics
Schematics can be found in Appendix B or at
Z86L9900ZCO Schematics.
Notes: 1 The IR Receiver (U8) only works at 5V.
It does NOT WORK at 3V.
2 Remove Crystal Y2 if emulating with the
Z86L9900100ZEM.
UM007401-0800