Z86C93 Datasheet, PDF (1/13 Pages) Zilog, Inc. – CMOS Z8 MULT/DIV MICROCONTROLLER

Z86C93
CPS DC-4020-12
CUSTOMER PROCUREMENT SPECIFICATION
GENERAL DESCRIPTION
The Z86C93 is a CMOS ROMless Z8 microcontroller en-
hanced with a hardwired 16-bit x 16-bit multiplier,
32-bit/16-bit divider, and three 16-bit counter timers (see
Functional Block Diagram). A capture register and a fast
decrement mode are also provided. It is offered in 40-pin
PDIP, 44-pin PLCC, 44-pin QFP, and 48-pin VQFP pack-
ages. The Z86C93 is functionally compatible with the
Z86C91, yet it offers a more powerful mathematical capa-
bility. In the PDIP package, the Z86C93 is fully pin compat-
ible with the Z86C91. In the PLCC package, the Z86C93 is
also pin compatible to the Z86C91, with the addition of four
signals (SCLK, /IACK, /SYNC, and /WAIT). The /WAIT
signal is only available on the 25 MHz and 33 MHz devices.
The Z86C93 provides up to 16 output address lines permit-
ting an address space of up to 64 Kbytes of data and
program memory each. Eight address outputs (AD7-AD0)
are provided by a multiplexed, 8-bit, Address/Data bus.
The remaining 8 bits can be provided by the software
configuration of Port 0 to output address bits A15-A8.
Z86C93
CMOS Z8^® MULT/DIV
MICROCONTROLLER
There are 256 registers located on chip and organized as
236 general-purpose registers, 16 control and status reg-
isters, one reserved register, and up to three I/O port
registers. The register file can be divided into 16 groups of
16 working registers each. Configuration of the registers in
this manner allows the use of short format instructions; in
addition, any of the individual registers can be accessed
directly. There are an additional 17 registers implemented
in the Expanded Register File in Banks D and E. Two of the
registers may be used as general-purpose registers, while
15 registers supply the data and control functions for the
Multiply/Divide Unit and additional Counter/Timer blocks.
Notes:
All Signals with a preceding front slash, "/", are active Low, e.g.:
B//W (WORD is active Low); /B/W (BYTE is active Low, only).
Power connections follow conventional descriptions below:
Connection
Circuit
Device
Power
V_CC
V_DD
Ground
GND
V
SS
DC-4020-12 (2-16-94)
1