English
Language : 

Z86C30 Datasheet, PDF (1/17 Pages) Zilog, Inc. – CMOS Z8 CONSUMER CONTROLLER PROCESSOR
Z86C30/C31/C32/C40
ZILOG
CP96DZ82900
PRELIMINARY
CUSTOMER PROCUREMENT SPECIFICATION
Z86C30/C31/C32/C40
CMOS Z8® CONSUMER
CONTROLLER PROCESSOR
FEATURES
ROM
Part
(KB)
Z86C30
4
Z86C31
2
Z86C32
2
Z86C40
4
* General-Purpose
RAM*
(Byte)
237
125
237
236
Speed
(MHz)
16
12
12
16
s 32 Input/Output Lines (C40)
24 Input/Output Lines (C3X)
s Vectored, Prioritized Interrupts with
Programmable Polarity
s Two Analog Comparators
s 28-Pin DIP, 28-Pin SOIC, 28-Pin PLCC Packages
(Z86C3X)
40-Pin DIP, 44-Pin PLCC/QFP Packages (Z86C40)
s 3.0V to 5.5V Operating Range
s Low-Power Consumption
s Two Programmable 8-Bit Counter/Timers,
Each with Two 6-Bit Programmable Prescaler
s Watch-Dog Timer/Power-On Reset
s On-Chip Oscillator that Accepts a Crystal, Ceramic
Resonator, LC, RC, or External Clock
s –40°C to +105°C Operating Range
s RAM and ROM Protect
s Expanded Register File (ERF)
GENERAL DESCRIPTION
The Z86C3X/C40 Consumer Controller Processors
(CCP) are members of the Z8® single-chip microcontroller
family offering a unique register-to-register architecture
that avoids accumulator bottlenecks and offers fast execu-
tion of code.
Three address spaces (Program Memory, Register File,
and Expanded Register File [ERF]), support a wide range
of memory configurations. Through the ERF, the designer
has access to three additional control registers that pro-
vide extra peripheral devices, I/O ports, and
register addresses. The rest of the ERF is not physically
implemented and is open for future expansion.
For applications demanding powerful I/O capabilities, the
Z86C3X/C40's dedicated input and output lines are
grouped into three and four ports, respectively, and are
configurable under software control to provide timing,
status signals, or parallel I/O.
Two on-chip counter/timers, with a large number of select-
able modes, offload the system of administering real-time
tasks such as counting/timing and I/O data communica-
tions.
With ROM/ROMless selectivity, the Z86C40 provides both
external memory and pre-programmed ROM, which
enables these Z8 microcontrollers to be used in high-
volume applications, or where code flexibility is required.
Notes:
All Signals with a preceding front slash, "/", are active Low, e.g.:
B//W (WORD is active Low); /B/W (BYTE is active Low, only).
Power connections follow conventional descriptions below:
Connection
Power
Ground
Circuit
VCC
GND
Device
VDD
VSS
CP96DZ82900
1