|
RY2 Datasheet, PDF (4/5 Pages) ZETTLER Electronics – Relays of general application | |||
|
◁ |
RY2
miniature industrial relays
Mounting
Relays RY2 are offered in versions: ⢠standard, for plug-in sockets ⢠with mounting flange in the upper wall of the cover.
Relays RY2 are designed for: ⢠screw terminals plug-in sockets GZY2G with clips GZY2G-0041 â¶, 35 mm rail mount
acc. to PN-EN 60715 or on panel mounting with two M3 screws ⢠flat insert connectors - faston 187 (4,8 x 0,5 mm),
relays are direct on panel mounting with two M3 screws - cover with mounting flange.
ⶠFor each GZY2G socket a set of two GZY2G-0041 clips shall be ordered.
Ordering codes
Type
Cover protection
category
Contact Number and type
material
of contacts
Connection
mode
Coil code
Additional
features
RY2â
â
â
â
Contact material
10 - AgCdO
20 - AgNi
see Tables 1, 2, 3 page 2
Number and type of contacts
12 - 2 CO
Cover protection category
2 - in cover, IP 40 version
4 - in cover with mounting flange, IP 40 version
Connection mode
6 - for flat insert connectors - faston 187 (4,8 x 0,5 mm)
and for plug-in sockets
Additional features â·
without marks - without additional features
L
- light indicator (LED diode)
D
- surge suppression element (diode)
LD - light indicator (LED diode) + surge suppression element (diode)
â· D, LD - only for DC coils
Note:
For relays with additional features D - surge suppression element (diode) (versions D and LD) - fixed supply polarity
compulsory for the DC load of coils: +A1(7) / -A2(8). The polarity is indicated on the relay cover. For other versions
of the relays with DC coils any polarity is possible.
Examples of ordering codes:
RY2-2012-26-1024
RY2-2012-26-5230-L
RY2-1012-46-3230
relay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
24 V DC, in cover IP 40
relay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
230 V AC 50/60 Hz, with light indicator (LED diode), in cover IP 40
relay RY2, for flat insert connectors - faston 187 (4,8 x 0,5 mm), two changeover contacts,
contact material AgCdO, coil voltage 230/240 V AC 50 Hz, in cover with mounting flange,
IP 40 version
4
Export Sales Department phone +48 68 47 90 832, 951 ⢠e-mail: export@relpol.com.pl
www.relpol.com.pl
|
▷ |