AZ983 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 80 AMP AUTOMOTIVE RELAY

AZ983
80 AMP
AUTOMOTIVE
RELAY
FEATURES
• 80 Amp contact rating
• High momentary carry current
• High operating temperature (85°C)
• SPST N.O. (1 Form A), SPDT (1 Form C),
SPST N.C. (1 Form B)
• PCB terminals
• Epoxy sealed version available
CONTACTS
Arrangement
SPST (1 Form A)
SPST (1 Form B)
SPDT (1 Form C)
Ratings
Resistive load:
1 Form A
Max. switched power: 1120 W
Max. switched current: 80 A
Max. switched voltage: 28 VDC
1 Form B
Max. switched power: 840 W
Max. switched current: 60 A
Max. switched voltage: 28 VDC
1 Form C
Rated Load
Max. switched power: 840 W
Max. switched current: 60 A
Max. switched voltage: 28 VDC
Resistive load:
1 Form A
80 A at 14 VDC Resistive, 20°C
40 A at 28 VDC Resistive, 20°C
40 A at 14 VDC Resistive, 85°C
20 A at 28 VDC Resistive, 85°C
120 A at 28 VDC Resistive, 85°C
(inrush for 3 seconds with make/break ratio 1:10)
1 Form B
60 A at 14 VDC Resistive, 20°C
30 A at 28 VDC Resistive, 20°C
30 A at 14 VDC Resistive, 85°C
15 A at 28 VDC Resistive, 85°C
1 Form C
60 A at 14 VDC Resistive, 20°C, (N.O.)
40 A at 28 VDC Resistive, 20°C, (N.O.)
40 A at 14 VDC Resistive, 85°C, (N.O.)
20 A at 28 VDC Resistive, 85°C, (N.O.)
Material
Resistance
60 A at 14 VDC Resistive, 20°C, (N.C.)
30 A at 28 VDC Resistive, 20°C, (N.C.)
30 A at 14 VDC Resistive, 85°C, (N.C.)
15 A at 28 VDC Resistive, 85°C, (N.C.)
Silver tin oxide
< 50 milliohms initially
(at 24 V, 1 A, voltage drop method)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 80 A 14 VDC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms between open contacts
Insulation Resistance 100 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Vibration
-40°C (-40°F) to 85°C (185°F)
0.062" (1.5 mm) DA at 10-55 Hz
Shock
10 g
Enclosure
PA 66
Terminals
Copper alloy
PCB
Weight
40 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
NOTES
0.76 W
3.0 W at 20°C (68°F)
68°C (122°F) at nominal coil voltage
Max.155°C (311°F)
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2012-10-18