AZ961 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – MINIATURE POWER RELAY

AZ961
MINIATURE
POWER RELAY
FEATURES
• 1 Form A or 1 Form C
• Standard and sensitive coils
• All plastics rated 94V-0
• Epoxy sealed version available
• Class B insulation system
• UL, CUR file E43203
Discontinuation Notice
Discontinuation date:
Date of last order:
Recommended replacement:
31.12.2012
15.11.2012
-
CONTACTS
Arrangement
Ratings
SPST NO (1 Form A)
SPDT (1 Form C)
Resistive load:
1 Form A
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Max. switched voltage: 150 VDC* or 300 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
1 Form C
Max. switched power: 150 W or 1250 VA (N.O.)
750 VA (N.C.)
Max. switched current: 5 A (N.O.), 3 A (N.C.)
Max. switched voltage: 150 VDC* or 300 VAC
UL, CUR
Material
1 Form A: 5 A at 250 VAC, General Use
3 A at 30 VDC
1 Form C: 5 A / 3 A at 250 VAC, General Use
5 A / 3 A at 30 VDC (N.O. / N.C.)
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Silver cadmium oxide
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Max. Temperature
Standard coil: 176 mW
Sensitive coil: 129 mW
1.5 W at 20°C (68°F)
At nominal coil voltage:
Standard coil: 27°C (49°F)
Sensitive coil: 20°C (36°F)
130°C (266°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 5 A 240 VAC Res. N.O.
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
4000 V surge (2 x 10 us) coil to contact
Insulation Resistance 1000 megohms min. at 500 VDC,
20°C, 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating Standard: 40°C (-40°F) to 75°C (167°F)
Sensitive: 40°C (-40°F) to 85°C (186°F)
Storage
40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
250°C (482°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
8 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2003-06-23