AZ947 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 20 AMP SUBMINIATURE PCB POWER RELAY FOR AUTOMOTIVE USE

AZ947
20 AMP SUBMINIATURE
PCB POWER RELAY
FOR AUTOMOTIVE USE
FEATURES
• Low cost
• 20 Amp contact rating
• Low profile, small footprint
• High operating temperature (85°C)
• SPST (1 Form A), SPDT (1 Form C)
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 280 W, 1250 VA
Max. switched voltage: 50 VDC, 125 VAC
20 A at 14 VDC Res. (make)
15 A at 14 VDC Res. (break) .
Material
Resistance
Silver tin oxide
< 50 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max Temperature
222 mW
1.09 W at 20°C (68°F) ambient
44°C (79°F) at nominal coil voltage
105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 20 A 14 VDC Res.
Operate Time (max.) 10 ms max. at nominal coil voltage
Release Time (max.)
5 ms max. at nominal coil voltage
(with no coil suppression)
Dielectric Strength
500 VAC coil to contact
(at sea level for 1 min.) 500 VAC between open contacts
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10-55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 Seconds
Weight
6 grams
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2003-05-27