AZ943S Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 15 AMP MINIATURE PC BOARD RELAY SMT

AZ943S
15 AMP
MINIATURE
PC BOARD RELAY SMT
FEATURES
• High performance
• Low seated height
• Flux tight version
• Class B insulation (130°C) standard
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
Ratings
UL/CUR
Ratings
Material
Resistance
SPDT (1 Form C)
Form C
Max. switched power: 210 W or 2770 VA
Max. switched current: 15 A AC, 7 A DC
Max. switched voltage: 30 VDC or 300 VAC
1 Form C
10 A at 277 VAC, general use, 100,000 cycles
1_{/2 HP at 125 VAC N.O.}
125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.)
Silver tin oxide
< 100 milliohms initally
(24 V, 1 A method)
COIL
Power
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.8 W at 20°C (68°F)
Life Expectancy
Mechanical
Electrical
1 x 10⁶
1 x 10⁵ at 10A 277 VAC Res.
Operate Time
10 ms max.
Release Time
5 ms max.
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms across contacts
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C(-40°F) to 70°C(158°F)
-40°C(-40°F) to 105°C(221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Temperature Rise
Temperature
32°C (58°F) at nominal coil voltage
Max. 130°C (266°F)
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, P.C.
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
10 g
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2003-08-26