AZ937_13 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – SENSITIVE SUBMINIATURE RELAY

AZ937
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint
• Thin vertical profile, only 7 mm wide
• High sensitivity, 113 mW pickup
• Dielectric strength 4000 Vrms
• 3 Amp switching capability
• Epoxy sealed
• UL, CUR file E44211
• TÜV certificate B031051228001
Discontinuation Notice
Discontinuation date:
Date of last order:
Recommended replacement:
31.12.2012
30.06.2012
AZ9371
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Max. switched voltage: 150 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL/CSA
TÜV
3 A at 250 VAC, general use, 200k cycles
3 A at 30 VDC, resistive, 200k cycles
1_{/10 HP at 250 VAC, 100k cycles}
3 A at 250 VAC / 30 VDC, resistive, 200k cycles
Material
Silver nickel
Resistance
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
113 mW
750 mW at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 million operations
1 X 10⁵ at 3 A, 30 VDC or 250 VAC res.
Operate Time (typical) 6 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
5 grams
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2010-12-17