AZ9371 Datasheet, PDF (1/3 Pages) ZETTLER Electronics – SENSITIVE SUBMINIATURE RELAY

AZ9371
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Thin vertical profile, only 7 mm wide
• High sensitivity, 113 mW pickup
• Dielectric strength 4000 Vrms
• > 5,5 mm clearance and creepage
• 5 Amp switching capability (version “T” 10 Amp)
• Two different footprints available
• Reinforced insulation (VDE 0700, 0631)
• UL, CUR file E44211
• VDE certificate 40030746
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Rated Load
UL
VDE
Material
Resistance
Max. switched power: 150 W or 1385 VA
(Version “T”: 300 W or 2770 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 277 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Standard version
5 A at 277 VAC, resistive, 85°C, 50k cycles [1][2]
5 A at 30 VDC, resistive, 85°C, 50k cycles [1][2]
3 A at 277 VAC, resistive, 85°C, 120k cycles [1][2]
3 A at 30 VDC, resistive, 85°C, 120k cycles [1][2]
B300 [2]
R300 [2]
High capacity version “T”
10 A at 277 VAC, resistive, 85°C, 10k cycles [1][2]
10 A at 30 VDC, resistive, 85°C, 10k cycles [1][2]
7 A at 277 VAC, resistive, 85°C, 60k cycles [2]
7 A at 277 VAC, resistive, 105°C, 50k cycles [1]
7 A at 30 VDC, resistive, 85°C, 60k cycles [2]
7 A at 30 VDC, resistive, 105°C, 50k cycles [1]
Standard version
5 A at 250 VAC, resistive, 85°C, 50k cycles [1][2]
5 A at 30 VDC, resistive, 85°C, 30k cycles [1][2]
4 A at 250 VAC. cos phi 0.4, 70°C, 100k cycles [1]
3A (51A) at 250VAC, capacitive, 85°C, 10k cycles [2]*
High capacity version “T”
10 A at 250 VAC, resistive, 85°C, 10k cycles [1][2]
10 A at 30 VDC, resistive, 85°C, 10k cycles [1][2]
7 A at 250 VAC, resistive, 105°C, 50k cycles [1]
7 A at 250 VAC, resistive, 85°C, 50k cycles [2]
7 A at 30 VDC, resistive, 105°C, 50k cycles [1]
7 A at 30 VDC, resistive, 85°C, 50k cycles [2]
* duty factor: 2 seconds on / 15 seconds off
Silver nickel [1], silver tin oxide [2],
gold plating available
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
GENERAL DATA
Life Expectancy
Mechanical
Standard version
Electrical
Minimum operations
5 million operations
1 x 10⁵ at 5 A, 250 VAC res. [1]
5 x 10⁴ at 5 A, 250 VAC res. [2]
High capacity version “T”
Electrical
1 x 10⁵ at 7 A, 250 VAC res. [1]
1 x 10⁴ at 10 A, 250 VAC res. [1][2]
3 x 10⁴ at 7 A, 250 VAC res. [2]
Operate Time (typical) 6 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Surge Voltage
Coil to contact
10,000 V (at 1.2x50 µs)
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
3 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-25