AZ880 Datasheet, PDF (1/4 Pages) American Zettler, Inc. – 10 A SPST / 8 A DPST POLARIZED SUBMINIATURE POWER RELAY SINGLE SIDE STABLE (NON-LATCHING) AND BISTABLE (LATCHING)

AZ880
10 A SPST / 8 A DPST POLARIZED
SUBMINIATURE POWER RELAY
MONOSTABLE OR LATCHING
FEATURES
• Dielectric strength 4000 Vrms
• Single and dual coil latching versions available
• Epoxy sealed version available
• UL, CUR file E44211
CONTACTS
GENERAL DATA
Arrangement
Ratings
SPST (1 Form A), DPST (2 Form A),
DPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 300 W or 2500 VA (SPST)
240 W or 2000 VA (DPST)
Max. switched current: 10 A (SPST)
8 A (DPST)
Max. switched voltage: 150 VDC* or 380 VAC
Material
Resistance
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Silver nickel [1], silver tin oxide [2],
Gold plating available
< 50 miliohms initially
COIL
Power
At Pickup Voltage 137 mW (2 coil latching or 2A monostable)
(typical)
98 mW (1 coil latching or 1A or 1AB monost.)
Max. Continuous 0.75 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 30°C (54°F) at nominal coil voltage
Max. Temperature 105°C (221°F)
NOTES
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 10 A 250 VAC resistive (SPST)
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Reset Time (typical)
4 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Dielectric Strength
(at sea level)
Insulation Resistance
4000 Vrms contact to coil (-1A, -1AB)
3000 Vrms coil to contact (-2A)
1000 Vrms between open contacts
2000 Vrms between contact sets
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
0.078” (2.0 mm) DA at 10 to 55 Hz
Shock
20 g functional
100 g destructive
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is recom-
mended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
7. DPST (1Form A and 1Form B): Both contacts may be closed
simultaneously during transfer at set / reset process.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
6 grams
20 per plastic tube / 1000 per carton box
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-06-17