AZ8462 Datasheet, PDF (1/4 Pages) American Zettler, Inc. – MICROMINIATURE POLARIZED RELAY

AZ8462
MICROMINIATURE
POLARIZED RELAY
FEATURES
• SMT and DIP mounting available
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 kV surge (per Bellcore TA-NWT-001089)
1.5 kV surge (per FCC Part 68)
1,000 Vrms, open contacts
2,000 Vrms, coil to contacts
• Monostable and bistable (latching) versions available
• Minimum switching load 10 mV, 10 ^µA
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed
• UL, CUR file E43203
CONTACTS
Arrangement DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC* or 250 VAC
Rated Load
UL
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
3 A at 30 VDC, resistive, 85°C, 100k cycles
2 A at 30 VDC resistive, 105°C, 100k cycles *
0.3 A at 110 VDC, resistive, 85°C, 100k cycles
0.5 A at 125 VAC, general use, 85°C
Material
Resistance
COIL
Power
* not approved for 48 VDC coil or latching versions.
Silver nickel gold plated
< 50 milliohms initially
At Pickup Voltage
(typical)
Monostable: 79 mW (1.5 - 24 VDC coil)
Monostable: 152 mW (48 VDC coil)
Bistable latching (single coil): 57 mW
Bistable latching (dual coil): 114 mW
Max. Continuous
Dissipation
0.39 W at 20°C (68°F) ambient
GENERAL DATA
Life Expectancy
Mechanical
Minimum operations
1 x 10⁸
Electrical
5 x 10⁵ at 1 A 30 VDC, resistive
1 x 10⁵ at 2 A 30 VDC, resistive
1 x 10⁵ at 0.5 A 120 VAC, resistive
Operate Time (max.) 4 ms at nominal coil voltage
Release Time (max.)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2000 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between contact sets
1000 Vrms between open contacts
Surge Voltage
Coil to contacts
Open contacts
2500 V (at 2/10 µs)
1500 V (at 10/160 µs)
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 105°C (221°F)
Vibration
3.3 mm DA at 10–55 Hz
Shock
75 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
see soldering profile
Max. Solder Time
see soldering profile
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
2.3 grams
Packing unit in pcs
40 per plastic tube
400 per reel
NOTES
Temperature Rise 25°C (45°F) at nominal coil voltage
(at nominal voltage)
Temperature
Max. 155°C (311°F) Class F
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
This product specification to be used only together with the application notes
fax: [phone] www.ZETTLERelectronics.com
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-26