AZ833 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – MICROMINIATURE POLARIZED RELAY

AZ833
Discontinuation Notice
Discontinuation date:
Date of last order:
Recommended replacement:
31.12.2012
30.06.2012
AZ8462
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed
• UL, CUR file E43203
• All plastics meet UL94 V–O, 30 min. oxygen index
CONTACTS
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
Rated Load
UL/CSA
0.25 A at 240 VAC
0.5 A at 125 VAC
2.0 A at 30 VDC
0.3 A at 110 VDC
Material
Silver nickel gold plated
Silver palladium available upon request
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
79 mW
1.0 W at 20°C (68°F)
At nominal coil voltage
18°C (32°F)
Temperature
Max. 110°C (230°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁸
1 x 10⁵ at 0.5 A, 125 VAC, resistive
2 x 10⁵ at 1.0 A, 30 VDC, resistive
Operate Time
(typical)
Release Time (typical)
3 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
Bounce (typical)
At 10 mA contact current
1 ms at operate or release
Dielectric Strength
(at sea level)
See table
Dropout
Greater than 10% of nominal coil voltage
Insulation Resistance 10⁹ ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
Operational, 35 g, 10–1000 Hz
Shock
Operational, 50 g min., 11 ms
Non-destructive, 150 g min., 11 ms
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
See soldering profile
See soldering profile
80°C (176°F)
30 seconds
2.3 grams
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Packing unit in pcs
THT
SMT
50 per plastic tube / 1000 per carton box
400 per reel / 2000 per carton box
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2005-08-04