AZ832P Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – POLARIZED DIP RELAY BISTABLE (LATCHING)

AZ832P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• Low profile DIP package
• Single and dual coil versions
• DC coils to 24 VDC
• High sensitivity, 42 mW pickup
• High switching capacity, 60 W, 250 VA
• Fits standard 16 pin IC socket
• Minimum switching load 10 mV, 10 ^µA
• Epoxy sealed
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
CONTACTS
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 3 A
Max. switched voltage: 220 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL
2 A at 30 VDC resistive
0.5 A at 60 VDC resistive
1 A at 120 VAC resistive
Material
Gold plated silver against palladium silver.
Gold plated palladium silver against palladium
silver (Suffix “A”)
Resistance
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature
Standard coil: 128 mW
Sensitive coil: 96 mW
0.9 W at 20°C (68°F)
Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 10⁷
1 x 10⁵ at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10⁶ at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical)
3 ms at nominal coil voltage
Reset Time (typical) 3 ms at nominal coil voltage
Bounce (typical)
3 ms
Dielectric Strength
(at sea level)
1500 Vrms contact to coil (1 coil version)
1200 Vrms contact to coils (2 coil version)
1500 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
50 g at 10–500 Hz
Shock
50 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
5 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-25