AZ7709 Datasheet, PDF (1/3 Pages) ZETTLER Electronics – SPST SUBMINIATURE POWER RELAY

AZ7709
SPST SUBMINIATURE
POWER RELAY
FEATURES
• 4 kV dielectric strength
• Proof tracking index (PTI/CTI) 250
• 5 Amp switching capability (version “T” 10 Amp)
• Epoxy sealed version available
• UL, CUR file E365652
• TÜV file B150188793002
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 150 W or 1250 VA
(Version “T”: 300 W or 2500 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 250 VAC
Rated Load
UL, CUR
TÜV
Material
Resistance
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Standard coil
5 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
5 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
Sensitive coil
3 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
3 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
High capacity version “T” - Standard coil
10 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
10 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
High capacity version “T” - Sensitive coil
8 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
8 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
Standard coil
5 A at 250 VAC, 100k cycles [1][2]
5 A at 30 VDC, 100k cycles [1][2]
Sensitive coil
3 A at 250 VAC, 100k cycles [1][2]
3 A at 30 VDC, 100k cycles [1][2]
High capacity version “T” - Standard coil
10 A at 250 VAC, 100k cycles [1][2]
10 A at 30 VDC, 100k cycles [1][2]
High capacity version “T” - Sensitive coil
8 A at 250 VAC, 100k cycles [1][2]
8 A at 30 VDC, 100k cycles [1][2]
Silver cadmium oxide [1], silver tin oxide [2],
silver tin oxide indium oxide [3],
gold plating available
< 100 milliohms initially
GENERAL DATA
Life Expectancy
Mechanical
Minimum operations
1 x 10⁷
Standard version
Electrical
1 x 10⁵ at 5 A 250 VAC Res.
High capacity version “T”
Electrical
1 x 10⁵ at 10 A 250 VAC Res.
Operate Time (max.) 8 ms at nominal coil voltage
Release Time (max.)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution dregree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Vibration
1.65 mm DA at 10–55 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2015-04-09