AZ767 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – SPDT SUBMINIATURE POWER RELAY

AZ767
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• Low cost
• 10 Amp switching
• Epoxy sealed version available
• UL, CUR file E44211
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
SPST-NO
Standard coil
Sensitive coil
SPDT
Resistive Load:
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 ADC or 10 AAC
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Rated Load
UL, CUR
Standard coil
Sensitive coil
Material
Resistance
Max. switched voltage: 150 VDC* or 380 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory
Form A
10 A at 125 VAC, Res., 30k cycles
5 A at 30 VDC / 250 VAC, 100k cycles
10 A LRA / 1.5 A FLA at 120 VAC, 100k cycles
1_{/10 HP at 125 VAC, 100k cycles}
1_{/6 HP at 250 VAC, 100k cycles}
5 A at 125 VAC, Res., 100k cycles
3 A at 30 VDC / 250 VAC, 100k cycles
Form C
3 A at 30 VDC / 250 VAC, 100k cycles
Silver cadmium oxide
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
253 mW standard coil
113 mW sensitive coil
1.25 W at 20°C (68°F) ambient
Temperature Rise 41°C (74°F) standard coil
(at nominal voltage) 22°C (40°F) sensitive coil
Temperature
Max. 130°C (266°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 5 A 250 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F) standard
-40°C (-40°F) to 85°C (185°F) sensitive
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–50 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
Packing unit in pcs 50 per plastic tray / 500 per carton box
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2005-03-08