AZ766_12 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – SPST SUBMINIATURE POWER RELAY

AZ766
SPST SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low seated height
• Low cost
• Epoxy sealed version available
• 12 Amp switching
• UL, CUR file E44211
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 13.5 A
Max. switched voltage: 150 VDC* or 400 VAC
Rated Load
UL, CUR
Material
Resistance
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
13.5 A at 125 VAC, Resistive, 6k cycles
12 A at 125 VAC, General use, 100k cycles
10 A at 277 VAC, General use, 100k cycles
8 A at 120 VAC, Resistive, 6k cycles
5 A at 250 VAC, General use, 100k cycles
10 A at 30 VDC, Resistive, 100k cycles
5 A at 30 VDC, Resistive, 100k cycles
1_{/4 HP at 125 VAC / 250 VAC}
TV-5
Silver tin oxide
< 50 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
253 mW
1.3 W at 20°C (68°F) ambient
39°C (70°F) at nominal coil voltage
Max. 130°C (266°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 12 A 125 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 85°C (188°F)
0.040" (1.0 mm) DA at 10–50 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
Packing unit in pcs 20 per plastic tube / 1500 per carton box
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2012-08-23