AZ762_14 Datasheet, PDF (1/3 Pages) ZETTLER Electronics – 16 A SPDT MINIATURE POWER RELAY

AZ762
16 A SPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006031
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 480 W or 5540 VA
Max. switched current: 16 A
Max. switched voltage: 125 VDC* or 440 VAC
Material
Resistance
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3]. Gold plating available
< 50 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
(at nominal coil voltage)
Temperature
200 mW standard DC coil
140 mW sensitive DC coil
.422 VA (AC coil)
1.7 W at 20°C (68°F) ambient
1.7 VA at 20°C (68°F) ambient
26°C (47°F) standard coil
17°C (31°F) sensitive coil
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 16 A 250 VAC Res.
Operate Time (typical) 7 ms at nominal coil voltage DC coils
10 ms at nominal coil voltage AC coils
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
DC coils
AC coils
Greater than 10% of nominal coil voltage
Greater than 15% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) DC coils
-40°C (-40°F) to 70°C (158°F) AC coils
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
14 grams
Packing unit in pcs 50 per plastic tray / 500 per carton box
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-01-29