AZ6991_12 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – SENSITIVE SUBMINIATURE RELAY

AZ6991
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small (5mm)
• 8 Amp switching capability
• High sensitivity, 95 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Isolation spacing greater than 8 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• Epoxy sealed version available
• UL, CUR file E43203
• VDE certificate 40020561
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 180 W or 2216 VA
Max. switched current: 8 A
Max. switched voltage: 125 VDC or 400VAC
Rated Load
UL, CUR
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
1 Form A
8 A at 277 VAC, resistive, 85°C, 10k cycles
6 A at 277 VAC, resistive, 85°C, 60k cycles
6 A at 30 VDC, 85°C, 60k cycles
C300, R300 pilot duty, 20°C, 30k cycles
1 Form C
8 A at 277 VAC, resistive, 85°C, 10k cycles (N.O.)
6 A at 277 VAC, resistive, 85°C, 30k cycles (N.O.)
6 A at 30 VDC, 85°C, 30k cycles (N.O.)
C300, R300 pilot duty, 20°C, 30k cycles (N.O.)
6 A at 277 VAC, resistive, 85°C, 10k cycles (N.C.)
6 A at 30 VDC, 85°C, 10k cycles (N.C.)
B300, R300 pilot duty, 85°C (N.C.)
VDE
1 Form A
6 A at 250 VAC, 85°C, 50k cycles
6 A at 30 VDC, 85°C, 60k cycles
Material
1 Form C
6 A at 250 VAC, 85°C, 10k cycles
6 A at 30 VDC, 85°C, 10k cycles
Silver nickel or silver tin oxide,
gold plating available
Resistance
< 50 milliohm initially
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specification subject to change without notice.
4. When install 1 Form C type of AZ6991, please do not mount “X”
marked side down.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 X 10⁷ operations
1 X 10⁵ at 5 A, 250 VAC
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1000 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms contact to coil
6000 V surge, contact to coil
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
1 mm DA at 10–500 Hz
Shock
5g
Enclosure
P.B.T. polyester 94V-0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
Packing unit in pcs
horizontal version 20 per plastic tube / 1000 per carton box
vertical version
100 per plastic tube / 2000 per carton box
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
95 mW (3 - 24 VDC coils)
112 mW (48 - 60 VDC coils)
0.9 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2012-05-04