AZ699 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SENSITIVE SUBMINIATURE RELAY

AZ699
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small (5mm)
• 6 Amp switching capability
• High sensitivity, 83 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils up to 48 VDC
• Epoxy sealed
• Clearance greater than 6 mm
• Creepage greater than 8 mm
• UL, CUR file E43203
• VDE file 40020124
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 150 W or 1500 VA
Max. switched current: 6 A
Max. switched voltage: 300 VDC* or 400 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
6 A at 250 VAC resistive
VDE
Material
Resistance
6 A at 250 VAC resistive
Silver tin oxide, gold plating available
< 100 milliohms initially (AgSnO2)
< 30 milliohms initially (AgSnO2, gold plated)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
83 mW
0.9 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Minimum permissible contact load:
AgSnO2 contact: 100 mA at 12 VDC
AgSnO2 contact with gold plating: 10 mA at 5 VDC
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 X 10⁷ operations
1 X 10⁵ at 5 A, 250 VAC
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1000 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms contact to coil
6000 V surge, contact to coil
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
5 g at 10–500 Hz
Shock
10 g
Enclosure
P.B.T. polyester 94V-0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
Packing unit in pcs 20 per plastic tube / 1000 per carton box
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2007-05-24