AZ6962 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 10 AMP SUBMINIATURE POWER RELAY

AZ6962
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 120 mW pickup
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 10 mm
• Proof tracking index (PTI/CTI) 250
• 10 Amp switching capability
• Epoxy sealed version available
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE file 40010953
CONTACTS
Arrangement
SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
(2 Form C: 5 A)
Max. switched voltage: 240* VDC or 440 VAC
Rated Load
UL, CUR
VDE
Material
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
10 A at 250 VAC resistive, 30k cycles [1], [2], [3]
10 A at 30 VDC resistive, 30k cycles [1], [2], [3]
B300, R300
5 A at 250 VAC resistive, 30k cycles [1], [2], [3]
(2 Form C)
8 A at 250 VAC resistive, 100k cycles [1], [2], [3]
(1 Form A, 1 Form B and 1 Form C)
Silver tin oxide [1] or silver nickel [2],
gold plated silver nickel [3] available
Resistance
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
120 mW (up to 24 VDC coil)
140 mW (48 VDC and 60 VDC coil)
1.2 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 10⁷
1 x 10⁵ at 8 A 250 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
1000 Vrms between open contacts
Insulation
Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout
1000 megohms min. at 20°C, 500 VDC,
50% RH
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
Shock
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
10 g
Enclosure
P.B.T. polyester, UL94 V-O
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
Packing unit in pcs
8 grams
20 per plastic tube / 1000 per carton box
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2004-07-28