AZ2800 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 30 AMP MINIATURE POWER RELAY

AZ2800
30 AMP MINIATURE
POWER RELAY
FEATURES
• 30 Amp switching capability
• DPST-NO and DPDT configuration
• Meets 8 mm creepage, 4 kV dielectric
• Class F construction
• Epoxy sealed version available
• UL, CUR file E44211, VDE pending
CONTACTS
Arrangement DPST (2 Form A)
DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 560 W or 8310 VA
Max. switched current: 30 A (N.O.), 3 A (N.C.)
Max. switched voltage: 600 VAC or 30 VDC*
Rated Load
UL, CUR
N.O.
UL, CUR
N.C.
Material
Resistance
* Note: If switching voltage is greater than 30VDC,
special precautions must be taken.
Please contact the factory.
30 A at 277 VAC General Use, 100k cycles
1 Hp at 120 VAC, 100k cycles
2.5 Hp at 240 VAC, 100k cycles
110 LRA / 25.3 FLA at 240 VAC (DC coils only),
30k cycles
3 A at 277 VAC General Use, 100k cycles
Silver cadmium oxide or silver tin oxide
<50 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 0.925 W
AC: 2.6 VA
DC: 5.0 W at 20°C (68°F)
AC: 7.0 VA at 20°C (68°F)
DC: 48°C (86°F) at nominal coil voltage
AC: 68° C (122°F) at nominal coil voltage
Max. 155°C (311°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 10⁷
1 x 10⁵ at 30 A 120 VAC Res. N.O.
Operate Time
15 ms typical
25 ms maximum with bounce
Release Time
10 ms typical
25 ms maximum with bounce
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms contact to coil
2000 Vrms between contact sets
Insulation Resistance
Dropout
10⁹ ohms minimum at 500 VDC
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
DC: -40°C (-40°F) to 85°C (185°F)
AC: -40°C (-40°F) to 65°C (149°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
Operational, 10 g for 11 ms ¹/₂ sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms ¹/₂ sine pulse
Enclosure
P.B.T. polyester
Terminals
Quick connect tabs
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
86 grams
Packing unit in pcs 20 per plastic tray / 100 per carton box
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.ZETTLERelectronics.com
2004-07-20