AZ2704 Datasheet, PDF (1/3 Pages) American Zettler, Inc. – 30 AMP POWER RELAY

AZ2704
30 AMP POWER RELAY
FEATURES
• 30 Amp switching
• 30 Amp AC7a approved
• 900 Amp short circuit current (carrying)
• PC mount
• Dielectric strength 4000 Vrms
• Standard (2.4 mm) or
wide contact gap (3.0 mm) available
• UL, CUR file E44211
• TÜV certificate R50164753
RoHS compliant !
CONTACTS
Arrangement
Ratings
SPST (1 Form X)
DPST (2 Form X)
Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 300 VDC* or 400 VAC
Rated Load
UL
* Note:If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
30 A at 277 VAC, resistive, 30k cycles [1][2]
25 A at 277 VAC, resistive, 100k cycles [2]
25 A at 240 VAC, resistive, 100k cycles [1]
3 HP at 240 VAC, 6k cycles [1]
1.5 HP at 120 VAC, 6k cycles [1]
TV-10 at 120 VAC, 6k cycles [1]
105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1]
SPST (1 Form X)
10 A at 120 VAC, tungsten, 6k cycles [1][2]
3 HP at 240 VAC, 100k cycles [2]
1.5 HP at 120 VAC, 100k cycles [2]
DPST (2 Form X)
10 A at 277 VAC, tungsten, 6k cycles [2]
10 A at 120 VAC, tungsten, 6k cycles [1]
2 HP at 277 VAC, 75k cycles [2]
1 HP at 125 VAC, 30k cycles [2]
TÜV
Material
Resistance
27 A at 240 VAC, cos phi 0.8, 50k cycles [1][2]
25 A at 240 VAC, cos phi 0.4, 50k cycles [1][2]
Silver cadmium oxide [1], silver tin oxide [2]
< 100 milliohm initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
1.08 W (DC)
1.7 VA (AC)
3.8 W at 20°C (68°F) ambient
50°C (90°F) at nominal coil voltage
Max. 130°C (266°F) - Class B
Max. 155°C (311°F) - Class F
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁶
1 x 10⁵ at rated load
Operate Time (typical) 30 ms at nominal coil voltage
Release Time (typical) 30 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
> 5% of nominal coil voltage (DC)
> 15% of nominal coil voltage (AC)
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F) at nominal,
-40°C (-40°F) to 85°C (185°F) at 50%
or less of nominal (holding voltage).
0.062" DA at 10–55 Hz
Shock
Operating
10 g, 11 ms, ¹/2 sine (no false operation)
Non-Operating 100 g, 11 ms, ¹/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, PC mount
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
Packing unit in pcs
120 grams
16 per plastic tray / 80 per carton box
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-08